IIA IIA-CIA-Part3 受
あなたは今IIAのIIA-CIA-Part3 受験料過去問のために準備していますか。そうであれば、あなたは夢がある人だと思います。我々JapanCertはあなたのような人に夢を叶えさせるという目標を持っています。我々の開発するIIAのIIA-CIA-Part3 受験料過去問は最新で最も豊富な問題集を含めています。あなたは我々の商品を購入したら、一年間の無料更新サービスを得られています。我々のソフトを利用してIIAのIIA-CIA-Part3 受験料過去問に合格するのは全然問題ないです。
試験科目：「Certified Internal Auditor - Part 3, Business Analysis and Information Technology」
NO.1 A company with many branch stores has decided to use its best-performing store as a
benchmark organization for the purpose of analyzing the accuracy and reliability of branch store
Which one of the following is the most likely measure to be included in a financial benchmark?
A. High amount of bad debt write-offs.
B. High turnover of employees.
C. High number of suppliers.
D. High level of employee participation in setting budgets.
Internal benchmarking is the application of best practices in one part of the organization (e.g., a
high-performing branch store) to its other parts (other branches). This process requires, among
other things, use of quantitative and qualitative measures. A key indicator for financial performance
measurement is the amount of bad debt write-offs. A high level of bad debt write-offs could
indicate fraud, which would compromise the accuracy and reliability of financial reports. Bad debt
write-offs may result from recording fictitious sales.
NO.2 All of the following are generally included in a cost-of-quality report except:
A. Supplier evaluations.
TQM emphasizes quality as a basic organizational function. TQM is the continuous pursuit of quality
in every aspect of organizational activities. One of the basic principles of TQM is doing it right the
first time. Thus, errors should be caught and corrected at the source.
18. Which of the following is a key to successful total quality management (TQM)?
A. Training quality inspectors.
B. Focusing intensely on the customer.
C. Creating appropriate hierarchies to increase efficiency.
D. Establishing a well-defined quality standard, then focusing on meeting it.
External failure costs arise when problems occur after delivery. They occur because products or
services are nonconforming or otherwise do not satisfy customers. External failure costs in service
enterprises are even more important than in manufacturing environments. Faulty goods sometimes
maybe reworked or replaced to a customer's satisfaction, but poor service tends to result in a loss of
16. A means of limiting production delays caused by equipment breakdown and repair is to:
A. Schedule production based on capacity planning.
B. Plan maintenance activity based on an analysis of equipment repair work orders.
C. Pre-authorize equipment maintenance and overtime pay.
D. Establish a preventive maintenance program for all production equipment.
D. Warranty claims.
A cost-of-quality report includes most costs related to quality, specifically the costs of prevention,
appraisal, internal failure, and external failure.
11. Which of the following is not an appropriate measure of quality?
A. Market share.
B. Delivery performance.
C. Customer satisfaction.
D. Raw materials costs.
F. Design engineering.
TQM emphasizes satisfaction of customers, both internal and external. TQM considers the supplier's
relationship with the customer, identifies customer needs, and recognizes that everyone in a
process is at some time a customer or supplier of someone else, either inside or outside of the
organization. Thus, TQM begins with external customer requirements, identifies internal
customer-supplier relationships and requirements, and establishes requirements for external
19. The four categories of costs associated with product quality costs are:
A. External failure, internal failure, prevention, and carrying.
B. External failure, internal failure, prevention, and appraisal.
C. External failure, internal failure, training, and appraisal.
D. Warranty, product liability, training, and appraisal.
TQM promotes teamwork by modifying or eliminating traditional (and rigid) vertical hierarchies and
instead forming flexible groups of specialists. Quality circles, cross-functional teams, and
self-managed teams are typical formats. Teams are an excellent means of encouraging the sharing
of ideas and removing process improvement obstacles.
13. If a company is customer-centered, its customers are defined as:
A. Only people external to the company who have purchased something from the company.
B. Only people internal to the company who directly use its product.
C. Anyone external to the company and those internal who rely on its product to get their job done.
D. Everybody external to the company who is currently doing, or may in the future do, business with
One of the principles of total quality management (TQM) is customer orientation, whether the
customer is internal or external. An internal customer is a member of the organization who relies on
another member's work to accomplish his/her task.
14. Management of a company is attempting to build a reputation as a world-class manufacturer
of quality products. Which of the following measures would not be used by the firm to measure
A. The percentage of shipments returned by customers because of poor quality.
B. The number of parts shipped per day.
C. The number of defective parts per million.
D. The percentage of products passing quality tests the firsttime
Prevention costs are incurred to prevent defects. Appraisal costs are incurred to detect defective
output during and after the production process. Internal failure costs are associated with defective
output discovered before shipping. External failure costs are associated with defective output
discovered after it has reached the customer.
20. Statistical quality control often involves the use of control charts whose basic purpose is to:
A. Determine when accounting control procedures are not working.
B. Control labor costs in production operations.
C. Detect performance trends away from normal operations.
D. Monitor internal control applications of information technology.
A preventive maintenance program reduces equipment breakdowns and repairs.
17. Under a total quality management (TQM) approach,
A. Measurement occurs throughout the process, and errors are caught and corrected at the source.
B. Quality control is performed by highly trained inspectors at the end of the production process.
C. Upper management assumes the primary responsibility for the quality of the products and
D. A large number of suppliers are used in order to obtain the lowest possible prices.
Emphasizing lower input costs may result in more defective output, and higher input costs may or
may not reflect the procurement of better raw materials. Financial measures are thus mostly
unsuitable for measuring quality.
12. One of the main reasons that implementation of a total quality management (TQM) program
works better through the use of teams is:
A. Teams are more efficient and help an organization reduce its staffing.
B. Employee motivation is always higher for team members than for individual contributors.
C. Teams are a natural vehicle for sharing ideas, which leads to process improvement.
D. The use of teams eliminates the need for supervision, thereby allowing a company to reduce
The number of parts shipped per day would most likely be used as a measure of the effectiveness
and efficiency of shipping procedures, not the quality of the product. This measure does not
consider how many of the parts are defective.
15. Quality costing is similar in service and manufacturing organizations. Nevertheless, the
between these organizations have certain implications for quality management. Thus,
A. Direct labor costs are usually a higher percentage of total costs in manufacturing organizations.
B. External failure costs are relatively greater in service organizations.
C. Quality improvements resulting in more efficient use of labor time are more likely to be accepted
by employees in service organizations.
D. Poor service is less likely to result in loss of customers than a faulty product.
N. Lost contribution margin.
Statistical control charts are graphic aids for monitoring the status of any process subject to random
variations. The chart consists of three horizontal lines plotted on a horizontal time scale. The vertical
scale represents the appropriate quantitative measure. The center line represents the average range
or overall mean for the process being controlled. The other two lines are the upper control limit and
the lower control limit. The processes are measured periodically, and the values are plotted on the
chart. If the value falls within the control limits, no action is taken. If the value falls outside the limits,
the process is considered "out of control," and an investigation is made for possible corrective
action. Another advantage of the chart is that it makes trends visible.
NO.3 Which statement best describes total quality management (TQM)?
A. TQM emphasizes better statistical quality control techniques.
B. TQM emphasizes doing each job right the first time.
C. TQM emphasizes encouraging cross-functional teamwork.
D. TQM emphasizes reducing the cost of inspection.
IIA-CIA-Part3 好評 IIA-CIA-Part3 リンクグローバル
TQM establishes quality as an organizational objective and views it as a major component of the
organization's service to its customers. It emphasizes employee training and commitment,
productservice design and production, and customer service. Ordinarily, the quality of a product or
service is as important to customers as cost and timeliness. Superior product quality is not merely
the result of more inspection, better statistical quality control, and cross-functional teamwork.
Manufactures must make fundamental changes in the way they produce products and do each job
right the first time.
NO.4 Which of the following costs of quality is a failure cost?
A. Systems development costs.
B. Costs of quality circles.
C. Costs of inspecting in-process items.
D. Contract penalty for delivery of nonconforming goods.
IIA-CIA-Part3 虎の巻 IIA-CIA-Part3 実際
Failure costs are incurred after defective output has been removed from production. A contract
penalty for faulty goods is an example of an external failure cost.
JapanCertは最新のC-THR86-1702問題集と高品質の210-255問題と回答を提供します。JapanCertの070-713 VCEテストエンジンと70-698試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の7893X PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。